Job description:

1. Be responsible for the design and management of all work related to the corresponding project and general layout design;

2. Conduct design surveys and callbacks for the profession, complete the research reports, and ensure the technical quality of the project;

3. Propose corresponding solutions and design schemes for the problems relevant to the general layout of the site engineering to ensure smooth progress of the work;

4. Participate in the study of design principle and main technical problems of the discipline, formulation and review of the design scheme after receiving the task;

5. Comprehensively check the design conditions and documents of design products, and be responsible for the quality of the checked design products;

6. Be responsible for confirming whether the design conditions proposed or accepted by relevant disciplines are complete and correct;

7. Be responsible for checking whether the design products meet the requirements for safety, production, construction, maintenance, etc.; whether the design products are complete and free of missing items, and whether the contents conform to the uniform provisions of design technology; Be responsible for the quality and integrity of design documents;

8. Implement the Detailed Rules for Professional Review of the discipline, and fill in the "Check Record" of the design documents;

9. Fully discuss and properly handle the problems found in the proofreading with the designer; In case of disagreement, the opinions shall be submitted to the reviewer or approver for decision.

Job requirements:

1. Education: bachelor deploma and above preferred;

2. Major requirements: general layout and transportation, urban planning;

3. Experience requirements: 5 to 10 years of relevant work experience;

4. Ability requirements: Have strong logical thinking ability, learning ability, communication ability and execution ability; Be equipped with strong ability to bear work pressure, sense of responsibility, positive optimism and positive energy; Be able to use design software skillfully;

5. Professional qualification: registered urban planning engineer (preferred).

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Be fully responsible for technical support related to buildings and structures;

2. Be responsible for the integration of relevant resources in the industry;

3. Be responsible for the formulation and review of technical scheme of the project;

4. Be responsible for technical check in the implementation stage of the project;

5. Be responsible for organization and solution of relevant technical problems;

6. Be responsible for research on the project characteristics and development trend of relevant industries and provision of support for the decision-making of the company;

7. Be responsible for relevant technical management of the company, including management and conversion of domestic and overseas design and construction standards and specifications;

8. Undertake the structure design task and relevant quotation work;

9. Be responsible for settlement of structural design problems and technical support on the construction site;

10. Other works arranged.

Job requirements:

1. Have bachelor's degree or above with major in building structure or related disciplines; Have more than 10 years of experience in petrochemical or fine chemical process design; The one with intermediate professional title and registered engineer certificate in related disciplines is preferred;

2. Be able to use relevant software of the discipline and master relevant regulations, standards and specifications of the discipline;

3. Have strong sense of responsibility, good team spirit, communication and coordination ability;

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Independently complete the design of static equipment for small and medium-sized projects in petrochemical industry, including conceptual design, basic design, detailed design, etc.;

2. Prepare professional design documents of static equipment to meet the requirements for procurement, equipment manufacturing and on-site installation, mainly including the following design documents: mechanical data tables of various static equipment, such as pressure vessels, atmospheric/low pressure storage tanks, heat exchangers, towers, technical specifications, pressure vessel calculations, engineering drawings, technical bid evaluation and list of material requisition.

Job requirements:

1. Majors in chemical process equipment, process equipment and control engineering;

2. Be proficient in use of professional software;

3. Have good ability of communication, expression, technical coordination and project organization and management;

4. Be familiar with relevant national regulations, standards and other technical specifications for pressure vessels.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Be familiar with powder process and equipment, and independently design powder process PID, equipment list, pipeline list and other process documents;

2. Powder equipment MR documents, manufacturer clarification, bid evaluation, drawing review; equipment and pipeline layout.

Job requirements:

1. Bachelor's degree or above with major in powder engineering, chemical engineering and process;

2. Working years: more than 2 years

3. Be proficient in the use of drawing software;

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Complete the preliminary design, scheme design and construction drawing design of the electrical discipline of the project;

2. Cooperate with process discipline and other disciplines to complete corresponding technical work, and be responsible for lighting, power distribution design and drawing of process package and pilot project;

3. Be responsible for engineering analysis and calculation of power supply and distribution system of petrochemical project, including short-circuit current calculation and load calculation;

4. Prepare the design documents of the discipline to meet the requirements of relevant documents such as national laws and regulations, design standards and specifications, and uniform regulations for professional design;

5. Cooperate with the Owner to prepare technical documents for electrical equipment bidding and participate in technical negotiation;

6. Conduct disclosure of design document and service at the construction site, and assist in guiding the construction and installation;

7. Be responsible for the preparation and technical support of electrical equipment and electrical related accessories of other complete equipment packages to ensure the orderly implementation of the work.

Job requirements:

1. Education: bachelor deploma and above preferred;

2. Major requirements: major in electrical engineering, automation and relevant disciplines;

3. Experience requirements: more than 10 years of relevant working experience;

4. Skills: strong logical thinking, learning, communication and implementation skills;

5. Strong ability to work under pressure, responsible, positive and optimistic with positive energy;

6. Be able to use design software skillfully;

7. Qualifications: licensed engineer's certificate in associated specialty (preferred)

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Independently complete the instrument design work at each stage under the leadership of discipline leaders, including preliminary quotation, feasibility study, basic design, detailed design, etc.;

2. Be responsible for preparation and verification of instrument design documents at each stage;

3. Prepare technical documents for inquiry of instrument equipment and materials, participate in technical negotiation, and complete evaluation and confirmation of technical bid;

4. Review and confirm the returned data of the supplier;

5. Provide support to on-site construction according to the needs of the project;

6. Complete other work assigned by the department.

Job requirements:

1. Bachelor's degree or above in production process automation or related major is required;

2. Have more than 10 years of employment experience in design institute/engineering company in respect with petrochemical and coal chemical industries;

3. Be familiar with domestic and international petrochemical specifications;

4. Experience in design of foreign-related/foreign-funded EPC projects is preferred;

5. Be good at team cooperation and communication;

6. Have good English listening, speaking, reading and writing skills to communicate decently;

7. Be familiar with and skillfully apply all kinds of instrument calculation software.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Conduct design surveys and callbacks for the profession, complete the research reports, and ensure the technical quality of the project;

2. Responsible for the overall design of pressure piping projects; prepare technical documents for piping design and organize design reviews;

3. Complete the piping system design, draw the piping layout plan, equipment layout plan, piping single line diagram, construction drawings, support bracket selection (and non-standard part design), etc. according to the project schedule requirements;

Job requirements:

1. Education: bachelor deploma and above preferred;

2. Professionals: chemical engineering and process related majors;

3. Skills: strong logical thinking, learning, communication and implementation skills;

4. Strong ability to work under pressure, responsible, positive and optimistic with positive energy;

5. Be familiar with drawing software, technical standards, procedures and specifications of chemical engineering and pipeline engineering;

6. Qualifications: licensed engineer's certificate in associated specialty (preferred)

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Be responsible for scheme design, preliminary design and detailed construction drawing design of process discipline;

2. Have certain ability to solve on-site problems;

3. Be responsible for chemical process design of pilot test, large-scale production and technical transformation projects;

4. Assist in preparing relevant documents required for project declaration and production;

5. Be responsible for design disclosure, guide the construction of on-site installation works and participate in trial production;

6. Design PID diagram according to project requirements, provide detailed and perfect process design descriptions, complete material and energy balance calculation, calculate equipment pipeline parameters, provide equipment pipeline table and equipment condition diagram, instrument and automatic control condition table, equipment layout drawing and pipeline layout diagram, and be responsible for the design and calibration of pipeline and instrument flow chart, process equipment table, equipment data table and process condition table;

7. Be responsible for chemical process and pipeline design (construction drawing).

Job requirements:

1. Bachelor's degree or above is required; Majors in chemical engineering and process or related fields are preferred;

2. Have more than 10 years of employment experience in design of process package;

3. Be able to independently take charge of chemical process design and technical transformation process design;

4. Be familiar with various office software and be good at using chemical design software;

6. The one with employment experience in chemical engineering design institute is preferred;

7. The one with independent chemical engineering design ability is preferred;

8. The certificate of registered chemical engineer is preferred.

9. Abide by the national laws and regulations, recognize the company's culture; Have good physical and mental health, and good appearance.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Collect qualification documents of suppliers, prepare supplier investigation and evaluation forms, prepare short and long list of suppliers and submit them for approval to promote the company's supplier management;

2. Formulate procurement strategy, prepare commercial bidding/inquiry documents, issue and implement bidding/inquiry documents to promote the preliminary work of procurement;

3. Participate in the commercial review of bidding/quotation documents, and prepare the bidding report to promote the bidding work;

4. Prepare contract documents, participate in contract negotiation, sign procurement contract, and ensure timely conclusion of contract;

5. Be responsible for expediting, urging, manufacturing supervision and payment during execution of the contract to ensure the smooth implementation of the contract;

6. Be responsible for the coordination with the supplier during on-site installation and commissioning to ensure that the on-site service is in place in a timely manner;

7. Sort, summarize and submit the problems in the procurement process to ensure the effective solution of various problems;

8. Organize and hand over the documents during the procurement process to ensure the integrity of the procurement business data;

9. Be responsible for the post-evaluation of suppliers and promote the optimization of the company's supplier resource base;

10. Collect claim information to complete claim work and strive for the maximum benefit of the company;

11. Complete other work assigned by superiors.

Job requirements:

1. Bachelor's degree or above is required;

2. Have more than 10 years of experience in procurement management in respect with petrochemical industry (control cabinet, Ups, Eps, DC power supply, emergency lighting, switch, lamp, explosion-proof electrical, etc.) ; Be familiar with products and manufacturers;

3. Have strong logical thinking ability, learning ability, communication ability and execution ability;

4. Strong ability to work under pressure, responsible, positive and optimistic with positive energy;

5. Be good at using various office systems and software.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Organize quality supervision, inspection and spot check on various engineering projects of the company, carry out statistical analysis on problems, track and verify the completion of rectification;

2. Supervise and inspect the implementation of review conclusions for technical proposal;

3. Supervise and inspect the management of design conditions, and monitor the process of signing, sending, transmitting, reviewing, accepting, modifying and archiving of design conditions;

4. Supervise and inspect the implementation of review conclusions for design input and output documents;

5. Check whether the number of various design products and process documents, and the preparation of design documents (including drawings, document tables, paper documents and electronic documents) at each stage meet the requirements of national, industrial, standards and the company's regulations;

6. Check the implementation of review and signature of the design, and make statistical analysis and summary on the repeated technical errors and drawing errors in the design process;

7. Collect and summarize design changes, and conduct quality statistical analysis and summary on reasons and types of design changes;

8. Be responsible for the collection, requisition, maintenance, verification or calibration, storage, allocation, supervision and use of quality testing equipment and tools;

9. Be responsible for the collection, update, publicity and implementation of national and local laws and regulations, and participation in compliance evaluation;

10. Be responsible for the collection and update of national, industrial and enterprise standards, and organize the preparation, revision and issuance of technical standards and specifications applicable to the company;

11. Supervise and inspect the implementation of standards;

12. Complete other work assigned by the superior leader.

Job requirements:

1. Bachelor's degree or above is required; Majors in engineering management or chemical engineering are preferred;

2. Have at least 5 years of employment experience in system and design quality management;

3. Be familiar with quality, environment and occupational health system standards; Be familiar with engineering design, general contracting knowledge and operation process, as well as the basic tools of quality management.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn

Job description:

1. Formulate and organize implementation of the contract management system and process of the company, and review the project-level contract management documents;

2. Be responsible for the unified management of various contracts and agreements for consulting, design, construction and project contract of the company; organize the negotiation and conclusion of project contracts and agreements, and review the project subcontracts;

3. Organize the disclosure of project contract (technical disclosure and commercial disclosure), and monitor the performance of project contract;

4. Participate in work related to construction subcontract bidding;

5. Track, check and assess the implementation of project contract management;

6. Organize to establish and maintain the list of subcontractors, contract accounts and project performance database;

7. Responsible for support to project marketing, project bidding and project support;

8. Be responsible for the daily management of the direct staff, including staff training, assessment, selection and motivation, so as to ensure to master the working conditions and demands of the staff in time;

9. Complete other work assigned by superiors.

Job requirements:

1. 5-10 years of relevant employment experience preferably in engineering company and design institute;

2. Have experience in engineering project contract management, and have participated in the bidding of engineering projects;

3. Being careful, patient, responsible, and have good communication and coordination skills.

To apply for employment, please send your resume to email: shzyhr@zonepic.cn